K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Body Control Module: Service and Repair
BODY CONTROL MODULE REPLACEMENT (LUXURY MODEL)
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the negative battery cable.
2. Remove the compartment trim plate.
3. Remove the audio amplifier.
4. Remove the body control module by releasing the tabs.
INSTALLATION PROCEDURE
1. Install the body control module into console and snap tabs in place.
2. Install the audio amplifier.
3. Install the compartment trim plate.
4. Install the negative battery cable.
