K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
5. Turn the steering wheel 180 degrees to gain access to the remaining access holes.
6. Insert a screwdriver into each access hole and push the leaf spring to release the pin that retains the inflator module.
7. Tilt the top of the inflator module rearward to gain access to the SIR wiring.
8. Disconnect the SIR lead wire from the clip on the inflator module.
9. Disconnect the SIR lead wire from the clip on the steering wheel.
10. Disconnect the Connector Position Assurance retainer.
11. Disconnect the electrical connector.
Caution: When carrying a live inflator module, make sure the bag opening is pointed away from you. This minimizes the chance of injury in
the case of an accidental deployment. Never carry the inflator module by the wires. Never carry the inflator module by the connector on the
underside of the module.
