K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Shock Absorber Replacement
REMOVAL PROCEDURE
1. Raise the vehicle on a hoist.
Notice: Original equipment shock absorbers serve additionally as suspension drop cutoffs. Replacement shock absorbers must have a built in
suspension cutoff feature and must not be longer than original shocks when they are fully extended or serious vehicle or component damage could
result.
2. Remove the lower nut, the washer, and the bolt. Collapse the shock absorber.
3. Remove the upper nut, the washer, and the bolt.
4. Remove the shock absorber.
INSTALLATION PROCEDURE
1. Install the shock absorber to the bracket.
2. Install the bolts. Fit the bolts in the direction shown.
3. Install the new nuts and the washers to the bolts.
-
Tighten the upper and the lower nut to 90 Nm (66 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Lower the vehicle.
Shock Absorber Disposal
