K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
4. Remove the following parts:
4.1.
Forward servo piston pin (5).
4.2.
O-ring seal (4).
4.3.
Servo piston (3).
4.4.
Retainer (2).
4.5.
Piston spring (1).
Installation Procedure
1. Install the following parts:
^
Piston spring (1).
^
Retainer (2).
^
Servo piston (3).
^
O-ring seal (4).
^
Forward servo piston pin (5).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the six forward servo gasket, cover, and six bolts.
^
Tighten the bolts to 24 Nm (18 ft. lbs.).
3. Install the oil pan and filter.
4. Lower the vehicle.