K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Flex Plate: Service and Repair
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the starter.
3. Remove the converter housing access plug.
4. Mark the converter and flywheel for proper alignment for installation.
5. Remove the flywheel to converter bolts.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the flywheel to converter bolts. Hand start the bolts.
^
Tighten the bolts to 60 Nm (44 ft. lbs.).
