K Yukon/Denali 4WD V8-6.5L DSL Turbo VIN S (1999)
Wiper Blade: Service and Repair
Blade Element Replacement - Rear
REMOVAL PROCEDURE
IMPORTANT: Replace the wiper blade element if it is removed from the wiper blade.
1. Remove the wiper blade from the wiper arm.
2. Squeeze the wiper blade element tabs together.
3. Pull the wiper blade element out through the wiper blade claws.
INSTALLATION PROCEDURE
1. Slide the wiper blade element through the bottom claw of the wiper blade.
2. Guide the wiper blade element through the wiper blade claws until both of the locking tabs engage the bottom claw set.
3. Install the wiper blade on the wiper arm.
