gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Customer Interest:|881806E > < Engine Controls - New PROM (Driveability/False Lights)|Page 2919
Page 5
background image

2.

Low speed road load surge.

3.

Detonation and weak acceleration during warm-up.

4.

Poor cold starting at minus 20 degrees Fahrenheit.

5.

False Code 24 - Vss circuit fault when using 4 wheel drive low lock.

6.

Tip-In sags/hesitations during engine warmup.

7.

Long crank times, hot or cold.

Condition

Service Action

Driveability

On 1988 models, to determine
whether or not the revised calibration PROM was built into the vehicle, use a "Scan" tool to check to see if vehicle has a
revised calibration PROM (see chart attached). Install revised calibration PROM if vehicle is not so equipped.

Use Labor Op.

J6364

Labor Time:

.6 hr C,K,R,V .7 hr G

Customer Interest:|881806E > < Engine Controls - New PROM (Driveability/False Lights)|Page 2919