R 3500 P/U 2WD V8-350 5.7L (1989)
King Pin: Service and Repair
V30/3500
1.
Remove hub and spindle.
2.
Remove upper king pin cap by alternately loosening nuts to unload the compression spring. Withdraw the spring and gasket.
3.
Remove the lower bearing cap and king pin.
4.
Remove upper king pin tapered bushing and knuckle from yoke. Remove felt king pin seal.
5.
Remove upper king pin from yoke using a large breaker bar.
6.
Drive lower king pin bearing cup, cone, grease retainer, and seal through bottom of knuckle using suitable tool.
7.
Reverse procedure to install. Tighten to specifications.
