R 3500 P/U 2WD V8-350 5.7L (1989)
Valve Body: Service and Repair
Hydra-Matic 700-R4 (4L60)
1.
Disconnect battery negative cable.
2.
Drain transmission fluid. Remove transmission oil pan, then the filter and gasket.
3.
Disconnect electrical connectors at valve body.
4.
Remove detent spring and roller assembly from valve body and remove valve body-to-case bolts.
5.
Remove valve body assembly while disconnecting manual control valve link from range selector inner lever and removing throttle lever bracket
from TV link.
6.
Reverse procedure to install.
