S15/T15 2WD Jimmy L4-151 2.5L (1985)
5.
Install injector in injector cavity, aligning raised lug on injector with notch in fuel meter body cavity.
6.
Push down on injector until fully seated in cavity, Fig. 341. At this time injector electrical terminals should be approximately parallel to throttle
shaft.
7.
Install fuel meter cover. Refer to "Fuel Meter Cover, Replace".
8.
Connect electrical connector, then install air cleaner assembly.
*** THIS PROCEDURE HAS BEEN UPDATED BY TSB # 86-36, dated 2/86
Remanufactured fuel injectors for Chevrolet vehicles are available for TBI systems using single and dual injectors for model years 1980-1986.