Repairing A-6 Compressor Clutch on 1988 2WD Jimmy V6-173 28L
Removing The Pulley Rotor & Bearing Assembly Retaining Ring
2. Pulley bearing retainer (24) using J 6083.
3. Pulley (26).
Installing The Pulley Rotor And Bearing Puller Guide
^
Install J 33023-A to the front head.
Removing The Pulley Rotor & Bearing Assembly
^
Install J 33020 tangs into the inner circle of slots in the pulley (26) contact surface. Rotate J 33020 clockwise so the fangs will lock into the
segments between the slots.
^
Hold J 33020 in place and tighten the puller screw against J 33023-A puller pilot to remove the pulley (26).
