S15/T15 2WD Jimmy V6-173 2.8L (1988)
Removing The Rotor & Bearing Assembly Retainer Ring
2. Snap ring (4) with J 6083.
^
Mark the location of the clutch coil terminals.
3. Rotor (6) and bearing (5) assembly.
Important
^
If the clutch rotor and/or rotor bearing are to be replaced, bend the washers (9) away from the pulley rim mounting screws (10). Remove the
six mounting screws (10) and washers (9).
Installing The Rotor And Bearing Guide
^
Install J 25031 guide over the compressor shaft (22).
Removing The Clutch Rotor Assembly
