gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Cruise Control Switch|Description and Operation|Page 122
Page 1
background image

Oil Pressure Sender: Customer Interest
Instruments - Oil Light Flickers at Idle

GMC NUMBER:

88-T-212

GROUP:

8A - Electrical Diagnosis

DATE:

July, 1989

CORPORATE
NUMBER:

938125

SUBJECT:

"CHECK GAGES" LIGHT FLICKERS AT IDLE

MODELS:

1986-88 S/T TRUCKS WITH 2.8L

Condition

The "Check Gages" light on 1986-88 S/T trucks with 2.8L engine and optional gage cluster may flicker at idle. The flicker will go away as soon as the
engine speed is above normal idle.

Cause

The off pressure sender is a combination unit, with both a sender for the gage and a switch for the light. The calibration of the switch is high enough to
allow the light to come on with the reduced oil pressure normally found at idle (6 to 10 psi).
Correction

1.

Insure that the engine has at lease 6 psi oil pressure at idle by using an external gage.

2.

Replace the sender with P/N 10137603.

Parts are currently available from GMSPO.

For vehicles repaired under warranty use:

Labor Operation:

N2220

Labor Time:

.3 Hr.

All Technical Service Bulletins: > < Cruise Control Switch|Description and Operation|Page 122