S15/T15 2WD Jimmy V6-173 2.8L (1988)
Clutch Slave Cylinder: Service and Repair
Clutch Slave Cylinder Replace
Fig. 2 Clutch slave cylinder
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Raise and support vehicle.
3. Hydraulic line from slave cylinder.
4. Slave cylinder retaining nuts and the slave cylinder.
INSTALL OR CONNECT
1. Hydraulic line to slave cylinder.
2. Slave cylinder and retaining nuts, torque to 14-20 Nm (10-15 ft lbs).
3. Lower vehicle.
4. Negative battery cable.
5. Fill reservoir and bleed system.
