S15/T15 2WD Jimmy V6-262 4.3L (1991)
4. Slide the heat shield inboard as far as possible within the mounting bracket slot.
5. Bend the accessible portion of the rear tab down to limit up and down movement of the shield.
6. Check heat shield for possible side movement and/or rattle.
7. If the heat shield can be moved and/or rattles, bend the mounting bracket toward the front of the vehicle and slightly upward, snugging the mounting
bracket against the heat shield.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Labor Operation:
L2280
Labor Time:
0.3 hrs.