S15/T15 2WD Jimmy V6-262 4.3L (1991)
Compressor Component View
Remove or Disconnect
Tools Required:
J 6083 External Snap Ring Pliers
J 25031 Rotor and Bearing Puller
J 9398-A Rotor Bearing Remover
1. Clutch plate and hub assembly (3).
Removing The Retaining Ring
2. Snap ring (4) with J 6083.
-
Mark the location of the clutch coil terminals.
Important
-
If only the clutch rotor and/or rotor bearing are to be replaced, bend the washers (9) away from the pulley rim and remove the six mounting
