S15/T15 2WD Jimmy V6-262 4.3L (1991)
3.
Remove fuel tank plastic shield.
4.
Support fuel tank and remove brackets. (Figure 1)
5.
Disconnect fuel tank filler neck.
6.
Disconnect fuel lines at filler neck.
7.
Lower tank and disconnect fuel lines and electrical connections at sender.
8.
Remove fuel sender and seal ring using tool J 36608 or J 24187 (Figure 2).
9.
Replace seal P/N 3893116 and reinstall sender using tool J 36608 or J 24187.
