S15/T15 2WD Jimmy V6-262 4.3L VIN W CPI (1993)
Fig. 86 APV Valve Assembly Replacement
The APV valve is not serviceable. It should be replaced when the DTC code charts show that it's the cause of a malfunction.
1.
Disconnect battery ground cable.
2.
Disconnect brake pipe fittings from APV.
3.
On S/T models, disconnect 4-way electrical connector from APV, Fig. 86.
4.
On all models, remove APV to bracket attaching bolts.
5.
On C/K models, disconnect APV valve electrical connector, Fig. 85.
6.
On all models, remove APV valve from vehicle.
7.
Reverse procedure to install, torque APV to bracket attaching bolts to 21 ft. lbs.
Isolation/Dump Valve Assembly
