S15/T15 2WD Jimmy V6-262 4.3L VIN W CPI (1993)
Accumulator Replacement
Evaporator And Blower Case Replacement
Remove Or Disconnect
1. Discharge and recover refrigerant from the system.
2. Drain cooling system.
3. Heater hoses from core.
4. Resistor (35) with the wire attached.
5. Electrical connectors, as necessary.
6. Evaporator tube (5) from evaporator (10).
7. Compressor hose assembly (3) from the accumulator (6).
8. Screws (29) and nuts (37).
9. Blower assembly from the vehicle.
10. Accumulator (6).
11. Screws (38).
