S15/T15 2WD Jimmy V6-262 4.3L VIN W CPI (1993)
Install TPS onto replacement throttle body assembly. Refer to THROTTLE POSITION SENSOR (TPS).
INSTALLATION:
1.
Install new throttle body to fuel meter body gasket.
2.
Install fuel meter body assembly on throttle body assembly.
3.
Install fuel meter body to throttle body attaching screws that have been coated with locking compound. Tighten the attaching screw assemblies to
4.0 Nm (3.50 lb-in).
4.
Install TBI unit onto intake manifold. Tighten mounting bolts to 16.0 Nm (12.0 lb-ft).
