S15/T15 2WD P/U L4-119 1.9L (1985)
Engine Mount: Service and Repair
Fig. 1 Engine mount
FRONT
1.
Disconnect battery ground cable.
2.
Remove air cleaner duct and upper fan shroud.
3.
Remove engine mount nuts and retaining wire.
4.
With vehicle raised, raise engine to take weight off mounts.
5.
Remove engine mount to engine bracket.
6.
Remove engine mount using tool J-25510, or equivalent, Fig. 1.
7.
Reverse procedure to install.
REAR
1.
Disconnect battery ground cable.
2.
Remove mount nut and bolts.
3.
Support, and slightly raise, transmission at extension housing and remove engine mount, Fig. 1.
4.
Reverse procedure to install.
