S15/T15 2WD P/U V6-262 4.3L (1988)
Installing The Clutch Coil Assembly
^
Thread through bolts into J 33026 to full fixture thickness.
^
Be sure J 8433-1 and the clutch coil assembly (6) stay "in line" during installation.
Staking The Clutch Coil Assembly To The Coil Head
^
When the clutch coil assembly (6) is seated on the front head (11), use a 3 mm (1/8-inch) diameter drift punch to stake the head (11) at 3
places, 120 degrees apart to assure the clutch coil assembly (6) remains in position.
Clutch Coil Staking Locations
-
Stake size should be one half the area of the punch tip and 0.25-0.35 mm (0.010-0.015-inch) deep.
3. Pulley (5).
4. Clutch plate and hub assembly (2).
