S15/T15 2WD P/U V6-262 4.3L (1988)
Fig 23. Fitting And Hose Installation
REMOVE OR DISCONNECT (Figures 1, 5, and 23)
NOTE: Tool Required: J-26549-D Orifice Tube Remover and Extractor
1. Refrigerant from the system.
2. Refrigerant inlet line (108) at the accumulator (4).
3. Orifice from the refrigerant line with J-26549-D.
INSTALL OR CONNECT
1. Orifice to the refrigerant inlet line (108).
^
Install the "shorter screen end" first into the expansion tube.
2. Refrigerant line (108) to the accumulator (4).
^
Tighten connection to 24 Nm (18 ft. lbs.).
3. Refrigerant to the system.
