S15/T15 2WD P/U V6-262 4.3L VIN W CPI (1993)
Keyless Entry Transmitter: Service and Repair
1. Ground pin G of the Data Link Connector (DLC).
2. Press any button of the first transmitter to be programmed.
3. The receiver module will respond by locking/unlocking doors and activating rear window release.
4. Press any button of the second transmitter to be programmed (if used).
5. The receiver module will respond by locking/unlocking doors and activating the rear window release.
6. Remove the ground applied to pin G of the Data Link Connector (DLC).
7. Transmitter operation is verified by locking and unlocking the doors and activating the rear window release.
