gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Digital Cluster - Blank, Speedometer at 188 W/Horn On|Page 8733 > < Parking Brake Warning Switch|Locations
Page 1
background image

Speedometer Head: Customer Interest
Digital Cluster - Blank, Speedometer at 188 W/Horn On

BULLETIN NUMBER: 93-8C-81

SECTION: 8C Instrument Panel

NUMBER: 4

CORPORATE
REFERENCE NUMBER: 368301

DATE: May 1993

SUBJECT:
DIGITAL CLUSTER GOES BLANK OR SPEEDOMETER READS 188 WHEN HORN IS DEPRESSED (INSTALL HORN KIT)

MODELS:
1993 S/T WITH DIGITAL IP CLUSTER (RPO U52)

CONDITION 
Some 1993 S/T trucks with RPO U52 Digital IP Clusters may experience an intermittent blank IP cluster or a reading of 188 on the speedometer display
when the ignition is on and the horn is depressed.

CAUSE 
This condition is caused by a voltage spike in the horn circuit when the horn is actuated.

CORRECTION 
To correct this condition engineering has released two service horn kits that have built-in electrical suppression. Vehicles have been corrected in
production after the following VIN's:

Pontiac West

P0513648

Moraine

P2523127

Shreveport

P8519090

SERVICE PROCEDURE

1.

Disconnect and remove "F" note horn from the left radiator support.

2.

Assemble "F" note horn and bracket from Horn Kit (P/N 10456443).

3.

Install and connect the horn.

4.

Disconnect and remove "A" note horn from the left inner fender.

a.

T-Truck - Remove the oil filter. If equipped with an L35 engine, remove the air cleaner assembly.

5.

Assemble "A" note horn and bracket from Horn Kit (P/N 10456328).

6.

Install and connect the horn.

7.

Reinstall the oil filter and remote air cleaner, if necessary.

8.

Check and add oil as required.

SERVICE PARTS INFORMATION

Part Number

Description

Qty

10456328

Horn Kit "A" Note

1

10456443

Horn Kit "F" Note

1

Parts are currently available from GMSPO.

Digital Cluster - Blank, Speedometer at 188 W/Horn On|Page 8733 > < Parking Brake Warning Switch|Locations