S15/T15 2WD P/U V6-262 4.3L VIN W CPI (1993)
Voltage Signal: Description and Operation
Battery Voltage Signal
PURPOSE
Inform the control module that there is a basic battery voltage problem.
OPERATION
Battery/ignition voltage is an analog input signal read by the control module. The ignition switched battery voltage circuit is used for this diagnostics.
If voltage is low, the control module can compensate for a weak spark delivered to the distributor by:
-
Increaseing injector on time.
-
Increaseing idle RPM.
-
Increaseing ignition dwell time.
