S15/T15 2WD P/U V6-262 4.3L VIN Z (1992)
12. Case sections (30 and 36).
13. Core (33).
Install Or Connect
1. Core (33).
-
Add or replace Refrigerant Oil as necessary.
2. Case sections (30 and 36).
3. Screws (38).
4. Accumulator (6).
5. Blower assembly to the vehicle.
6. Screws (29) and nuts (37).
Tighten
-
Screws (29) to 3 Nm (27 in. lb.).
-
Nuts (37) to 2 Nm (18 in. lb.).
7. Compressor hose assembly (3) to accumulator.
8. Evaporator tube (5) to evaporator (10).
Tighten
-
Evaporator tube connection to 41 Nm (30 ft. lb.).
-
Compressor hose assembly to 41 Nm (30 ft. lb.).
9. Electrical connectors, as necessary.
10. Resistor (35).
11. Heater hoses to core.
12. Refill cooling system.
13. Refrigerant to the system.
-
Check the system for leaks.
