S15/T15 2WD P/U V6-262 4.3L VIN Z (1992)
Wheel Bearing: Technical Service Bulletins
Drivetrain - Rear Axle Identification/Parts Application
GMC NUMBER:
92-4B-45
GROUP:
4B Rear Axle
DATE:
January 1992
CORPORATE
NUMBER:
164203
SUBJECT:
REAR AXLE IDENTIFICATION FOR S-TRUCKS (INFORMATIONAL)
MODELS:
1992 S-TRUCKS (2WD JIMMY/SONOMA)
1992 S-trucks may be equipped with a 7.5-inch axle manufactured in either St. Catherine, Canada or Buffalo, New York. Both axle assemblies have the
same final assembly part number, but use a different housing assembly service kit and wheel bearing seal depending on where the axle assembly was
manufactured. The correct housing assembly service kit and wheel bearing seal must be used when servicing a 1992 S-truck 7.5-inch axle. All other
assembly parts are common and interchangeable.
To identify where the axle assembly was built:
FIGURE 1
1.
Locate the axle code on the axle housing (Figure 1).
2.
Find the fourth letter (from the left) of the code.
K = St. Catherine, Canada
C = Buffalo, New York
SERVICE PARTS INFORMATION: