S15/T15 4WD Jimmy V6-173 2.8L (1988)
Important
The insulator is designed for a G-van and must be modified for use on an S/T truck accumulator
2.
Cut the lower insulator as necessary to fit the accumulator mounting bracket. Cut the upper insulator as necessary to accommodate the A/C pipes
and fittings.
3.
Install the clamp (2) on the insulators at the overlapped portion and tighten the clamp. Inspection:
1.
Start the engine and check all hose connections for leaks.
2 Place the climate control lever in the *Max A/C" position and ensure that the water valve is operating properly.
PARTS INFORMATION:
WARRANTY INFORMATION For vehicles repaired under warranty use:
Labor Operation:
T7001
Labor Time:
.7 hr
NOTE:
Labor Operation is coded to base vehicle coverage in the warranty system.