S15/T15 4WD Jimmy V6-262 4.3L VIN W CPI (1993)
Tools Required
-
J 23765 Axle Shaft Bearing Installer
-
J 23771 Axle Shaft Seal Installer
1. Bearing with J 23765 until the tool bottoms against the housing shoulder.
-
Lubricate the bearing with gear lubricant.
2. Seal using J 23771 until the seal is flush with the axle tube.
-
Lubricate the seal lips with gear lubricant.
3. Rear wheel speed sensor.
4. Axle shaft.