S15/T15 4WD Jimmy V6-262 4.3L VIN W CPI (1993)
plate). Old valve body gaskets and spacer plates are not to be reused.
17. Install new transmission oil filter and install transmission oil pan using new transmission oil pan gasket.
17a. Refill transmission with 4 quarts of automatic transmission fluid (Dextron IIE or Dextron III).
17b. Start unit and engage all gears. Recheck transmission fluid level and adjust level as required. Inspect for any fluid leaks and correct before
returning unit to customer.
18. Install new PROM (MEM-CAL) as described in On-Vehicle section of service manual.
19. Install Campaign Identification Label.
Campaign Identification Label
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. Additional "Campaign Identification Labels" can be obtained from DAC.
Apply "Campaign Identification Label" only on a clean, dry surface.
Claim Information
Submit a Product Campaign Claim with the information indicated.
For labor operations V8951 and V8952, up to 4 quarts of transmission fluid can be claimed in the "Net Amount column."
Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.
