S15/T15 4WD Jimmy V6-262 4.3L VIN W CPI (1993)
4. Attach tool J4135O to case with bushing and lettering facing floor as shown in Figures 5 and 6.
5. Use bolts provided with tool and install all bolts finger tight prior to tightening to eliminate possible bolt misalignment (Figure 6)
6. Torque all bolts to 5 N-m (44 lb.in.) (Figure 7)
Notice:
If valve body bolts are used with tool they will cause damage to case due to length differences. Use bolt supplied with special tool J41350.