S15/T15 4WD Jimmy V6-262 4.3L VIN W CPI (1993)
7. Drill out case using drill bit provided in tool kit J4l350. Apply cutting fluid to drill. The plate from tool kit J4135O has a drill guide bushing in the
center. Drill bit should be placed in drill guide bushing when drilling out case. Depth of drill must go until shoulder stop of the drill bit meets the drill
bushing to guarantee proper depth (Figure 8) and to open the oil channel.
Notice:
Do not drill case with valve body or other related hardware directly below.
8. Remove tool J4135O from case (Figure 9).
