S15/T15 4WD Jimmy V6-262 4.3L VIN Z (1992)
4.
Install the front output shaft yoke as outlined in section 7D-13 of the 1992 Sonoma and Jimmy Service Manual (TRANSFER CASE OUTPUT
SHAFT SEAL REPLACEMENT).
5.
Install the front propeller shaft, refer to section 4A (PROPELLER SHAFT) in the 1992 Sonoma and Jimmy Service Manual.
6.
Connect the encoder motor electrical connection.
7.
Connect the negative battery cable. Lower the vehicle.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Labor Operation:
K4124
Labor Time:
0.7 hrs.
