S15/T15 4WD P/U L4-121 2.0L VIN Y 2-bbl (1983)
SKETCH 4 - OLD HINGE SEAL
6.
Remove old hinge seal (Sketch 4).
7.
Clean the area of the old seal of all residue, dirt, etc.
SKETCH 5
8.
Remove the backing paper from the new seal and position on the vehicle by slipping under the hood hinge. The seal should be pressed securely to
the surface of the plenum panel to cause total wet-out of seal adhesive (Sketch 5).
9.
Reassemble cowl panel, hood, and wipers.