S15/T15 4WD P/U V6-262 4.3L (1988)
Caliper Knuckle Clearances
5. Measure the clearance between the caliper and the steering knuckle. The clearance at each end of the caliper should be measured individually and
added together. this total should be between 0.26-0.60 mm (0.010-0.024 inch).
6. If brake hose was removed, reconnect it and bleed the brakes.
7. Install wheels and tires, lower vehicle and add brake fluid to master cylinder to bring level to 1/4 inch from top.
WARNING: Before moving vehicle, pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is
obtained.