gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins:|88T36 > < Engine - Drive Belt Misalignment Diagnostics|Page 600
Page 1
background image

Drive Belt: All Technical Service Bulletins
Belts - Serpentine Belt Chirp

GMC NUMBER:

88-T-136

GROUP:

6A - Engine Mechanical

DATE:

August, 1988

CORPORATE
NUMBER:

836520R

SUBJECT:

SERPENTINE BELT CHIRP

MODEL:

1988 S/T TRUCK WITH 4.3L ENGINE (VIN CODE Z)

FIGURE 1

Some owners of 1988 4.3L S/T trucks may experience a chirping noise from the accessory drive belt. "Belt Chirp" is a short duration, intermittent, high
pitched sound and should not be confused with belt "squeal", which is continuous in nature. This condition can be addressed by aligning the power
steering pump pulley 3/4 mm plus or minus
1/4 mm (.030" plus or minus .010") forward of flush with the power steering pump shaft (See Figure No. 1). A wheel puller should be used to perform
this realignment.
Labor OP:

T7460

Labor Time:

.3 Hr.

All Technical Service Bulletins:|88T36 > < Engine - Drive Belt Misalignment Diagnostics|Page 600