S15/T15 4WD P/U V6-262 4.3L VIN W CPI (1992)
Fig. 25 Radio Receiver Removal & Installation
Fig. 26 Speaker Removal & Installation
1.
Disconnect battery ground cable.
2.
Remove lamp switch trim plate attaching screws, then pull lamp switch rearward and disconnect wiring harness, Fig. 23.
3.
Remove A/C and heater control assembly attaching screws, then pull control assembly rearward and disconnect electrical connector.
4.
Remove filler panel attaching screws and filler panel, Fig. 24.
5.
Remove instrument cluster housing attaching nuts and cluster housing.
6.
Remove instrument cluster attaching nuts, then pull cluster rearward and disconnect electrical connector and speedometer cable.
7.
Disconnect transmission control cable from steering column, then remove steering column attaching bolts and lower steering column.
