S15/T15 4WD P/U V6-262 4.3L VIN W CPI (1992)
Fig. 11 Lower Control Arm Rear Bushing Installation. 4 X 2 Models
1.
Remove coil spring as outlined in COIL SPRING.
2.
Remove lower control arm pivot bolts, refer to COIL SPRING.
3.
Drive bushing flare down flush with rubber of front bushing, then remove front and rear bushings from control arm, Figs. 7 and 8.
4.
Install front bushing, Fig. 9, then flare the bushing, Fig. 10.
5.
Install rear bushings, Fig. 11, then the lower control arm as described previously.
4 X 4
Fig. 12 Lower Control Arm Bushing Replacement. 4 X 4 Models
1.
Raise and support vehicle.
2.
Remove wheel and tire assembly.
3.
Unload torsion bar.
4.
Remove stabilizer shaft.
5.
Remove shock absorber as outlined in SHOCK ABSORBER.
6.
Remove control arm pivot bolts then the lower control arm.
7.
Remove lower control arm front and rear bushings, refer to Fig. 12.
8.
Reverse procedure to install.
