S15/T15 Jimmy 2WD V6-262 4.3L VIN Z (1994)
Brake Bleeding: Service and Repair
With Rear Wheel Antilock Brake System
REAR WHEEL ANTILOCK BRAKE SYSTEM BLEEDING
NOTICE: The ignition switch must be in the "OFF" position or false DTCs could be set to memory.
Tools Required:
- J 39177 Combination Valve Pressure Bleeding Tool
- TK 00000 Tech-1 Scan Tool
- TK 02650 RWALI4WAL Cartridge Kit or 7000001 Mass Storage Cartridge
1. Install J 39177 on the combination valve.
2. Check the master cylinder reservoir fluid level and fill it needed.
3. Bleed wheel cylinders and calipers.
4. Turn ignition switch "ON" and do three function tests with the Tech-1 scan tool.
5. Re-bleed the rear brakes as described under Pressure Bleeding.
6. Evaluate brake pedal feel.
7. Repeat the bleed procedure if needed.
