S15/T15 Jimmy 2WD V6-262 4.3L VIN Z (1994)
Hose/Line HVAC: Service Precautions
The life and efficient operation of the air conditioning system depends upon the chemical stability of the refrigerant system. When foreign materials, such
as dirt, air, or moisture, contaminate the refrigeration system, they change the stability of the Refrigerant-12 or Refrigerant-134a and 525 viscosity or
polyalkaline glycol (PAG) refrigerant oil. They will also affect the pressure-temperature relationship, reduce efficiency, and could cause internal
corrosion and abnormal wear of moving parts.
The following general practices should be followed to ensure chemical stability in the system:
1. Whenever it becomes necessary to disconnect a hose connection, wipe away any dirt or oil at or near the connection to eliminate the possibility of
dirt entering the system. Both sides of the connection should be capped, plugged, or taped as soon as possible to prevent the entrance of dirt and
moisture. (Remember that all air contains moisture. Air that enters any part of the refrigeration system will carry moisture with it, and the exposed
surfaces will collect the moisture quickly.)
2. Keep tools clean and dry. This includes the Manifold Gage Set and all replacement parts.
3. When adding 525 viscosity or polyalkaline glycol (PAG) refrigerant oil, the container/transfer tube through which the oil will flow should be
exceptionally clean and dry. Refrigerant oil must be as moisture-free as possible.
4. When it is necessary to "open" an air conditioning system, have everything needed ready so that as little time as possible will be required to
perform the operation. Do not leave the air conditioning system open any longer than necessary.
5. Anytime the air conditioning system has been "opened," it should be properly evacuated before recharging.
