S15/T15 Jimmy 2WD V6-262 4.3L VIN Z (1994)
13.10. Install the nuts (4) to the A/C refrigerant filter (1).
TIGHTEN
Nuts to 15 Nm (11 lb ft).
14. Add the total system capacity of PAG oil to the A/C system. Refer to the System Capacities table in the appropriate Service Manual.
15. Add one bottle of J 41447 dye, GM P/N 12346303 (in Canada, use 10953458), or the equivalent using the J 41459 dye injector (or the
equivalent).
16. Recharge the A/C system.
17. Leak test all connections using the J 44220 Universal 12V Leak Detection Lamp or the J 39400-A Leak Detector.