S15/T15 Jimmy 2WD V6-262 4.3L VIN Z (1994)
Clutch Slave Cylinder: Service and Repair
Secondary (Slave) Cylinder
Fig. 3 Clutch Slave Cylinder.
REMOVAL
1. Raise and support vehicle.
2. Disconnect hydraulic line from slave cylinder, Fig. 3.
3. Remove slave cylinder retaining nuts, then the slave cylinder.
INSTALLATION
1. Connect hydraulic line to slave cylinder, Fig. 3.
2. Bleed system.
3. Position slave cylinder on bellhousing, then install retaining nuts and tighten to specifications.
