S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
6. Install the valve lifters and the valve pushrods.
7. Install the engine front cover.
8. Install the intake manifold.
IMPORTANT: Rotate the engine to align the crankshaft balancer marks with the front cover marks for cylinder number one top dead center.
When the alignment marks on the camshaft sprocket and the crankshaft sprocket are aligned the engine is at cylinder number four top dead center.
9. Rotate the engine to align the crankshaft balancer marks (1) and (4) with the engine front cover marks (2) and (3) for cylinder number one top
dead center.
10. Install the distributor.
11. Install the valve rocker arm covers.
12. Install the condenser, if equipped.
13. Install the radiator.
14. Fill the engine cooling system.
15. Recharge the air conditioning system, if equipped.
16. Install the air cleaner assembly.
17. Connect the battery negative cable.