S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Compressor Clutch Bearing: Service and Repair
Removal Procedure
Tools Required
-
J 33023-A Puller Pilot
-
J 41552 Compressor Pulley Puller
-
J 41790 Compressor Holding Fixture
1. Remove the compressor from the vehicle.
2. Clamp the compressor holding fixture J 41790 in a vise and attach the compressor to the J 41790.
3. Remove the clutch plate and hub assembly.
4. Using external snap ring pliers (1), remove the clutch rotor and bearing assembly retaining ring (3).