S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Glove Box Lamp: Service and Repair
REMOVAL PROCEDURE
1. Remove the instrument panel storage compartment bezel.
2. Connect the electrical connector from the lamp and switch assembly.
3. Remove the lamp and switch assembly from the instrument panel storage compartment bezel. Release the lock tabs and push the lamp and switch
assembly out.
4. Remove the bulb from the lamp and switch assembly.
INSTALLATION PROCEDURE
1. Install the bulb to the lamp and switch assembly.
2. Install the lamp and switch assembly.
3. Connect the electrical connector to the lamp and switch assembly.
4. Install the instrument panel storage compartment bezel.