S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
6. Install the pressure control solenoid retainer bolt and screw.
-
Tighten the TCC solenoid bolts/screws to 11 Nm (97 inch lbs.).
-
Tighten the pressure control solenoid bolt/screw to 11 Nm (97 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
7. Install the TCC PWM solenoid to the control valve body.
8. Install the TCC PWM solenoid retainer.
9. Connect the component electrical connectors.
IMPORTANT: The piston legs must face toward the case when installed.