S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Keyless Entry Module: Service and Repair
REMOVAL PROCEDURE
1. Remove the left-side instrument panel sound insulator.
2. Disconnect the electrical connector.
3. Remove the remote control door lock receiver from the instrument panel sound insulator by unsnapping it.
INSTALLATION PROCEDURE
1. Install the remote control door lock receiver to the instrument panel sound insulator by snapping it into place.
2. Connect the electrical connector.
3. Install the left-side instrument panel sound insulator.
4. Reprogram the transmitters.
5. Test the operation of the system.
