S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Tighten the bolts to 45 N.m (33 lb ft).
14.
Install the seat cushion cover to the seat bottom frame.
15.
Connect the electrical connections to adjuster assembly.
16.
Install the seat belt buckle.
Tighten
Tighten the bolt to 70 N.m (52 lb ft).
17.
Install the heated/lumbar switch and the screws to the seat, if equipped.
18.
Install the shield, P/N 12476162 or 12476163, and the attaching screws, P/N 12476198. Use existing screw holes as shown.
19.
Install the seat assembly into the vehicle.
