S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
^
First Fastener Repair
1. Remove and discard the improperly installed rivet.
2. Reattach sensor with new rivet.
Second Fastener Repair
^
Second Fastener Repair
1. Remove the improperly installed rivet.
2. Enlarge the mounting holes in the lower radiator support to 9.0 mm (0.35 in).
3. Insert and properly seat rivnut GM P/N 15715058
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install sensor with screw.
Tighten
Tighten fasteners to 8.0 N.m (71 lb in).
Installation Procedure
